| Type: | Crawler Excavator |
|---|---|
| Usage: | GM Excavator |
| Bucket: | Backhoe |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SDLG E690F Energy-Saving Excavator for Municipal Construction, Cities and Towns Construction
E690F is a 9-ton multi-working small excavator. Mainly engaged in the excavation, loading and unloading of materials such as soil, sand, coal, garbage and other materials, crushing, and leveling operations. It is widely used in mines, construction sites, underground mining, gardens, municipal administration and urban construction.
1. The original imported Yanmar 4TNV98T turbocharged engine meets the T3 emission requirements. It has strong power, high reliability, automatic idling function, low emission, low noise and low fuel consumption.
2. Load sensing hydraulic system, pilot control, high efficiency and energy saving, light operation, better coordination of compound actions.
3. It adopts reinforced upper and lower frame, with strong carrying capacity, reasonable load distribution of the whole machine, and good stability. X-type off-frame, high stability of the whole machine; standard enhanced working device, the whole machine has a strong ability to adapt to harsh working conditions.
4. Optimized design of the cab, spacious and bright, wide vision, good sealing effect, high-end shock-absorbing seats, dual-stage filter heating and cooling air-conditioning, silicone oil rubber three-stage shock absorber, good shock absorption effect, comfortable driving environment.
5. The electrical system of the whole machine adopts centralized control, which has high reliability and convenient maintenance and inspection; the intelligent monitoring system can monitor the working status of the whole machine in real time, and has good man-machine interaction.
6. It can realize quick change and a variety of accessory configurations, and try to meet the needs of users with one machine and multiple working conditions.
| Overall dimension | |
| Overall width of upper assembly(A) | 2255mm |
| Overall width(B) | 2265mm |
| Overall height of cab(C) | 2600mm |
| Tail swing radius(D) | 1895mm |
| Overall height of engine hood(E) | 1790mm |
| Ground clearance of counterweight (F) | 800mm |
| Wheelbase (G) | 2220mm |
| Crawler length (H) | 2870mm |
| Crawler gauge (I) | 1780mm |
| Crawler pad width (J) | 450mm |
| Min. ground clearance (K) | 400mm |
| Overall length (L) | 6340mm |
| Overall height of boom (M) | 2500mm |
| Overall parameters | |
| Bucket capacity | 0.32m³ |
| Overall operating weight | 8550kg |
| Max. excavation force | 60KN |
| Slew speed | 0-12r/min |
| Traveling speed (low/high) | 2.6/5.0km/h |
| Average ground pressure | 33.3kPa |
| Max. digging radius | 6330mm |
| Max. digging depth | 4160mm |
| Max. digging height | 7216mm |
| Max. dumping height | 5010mm |
| Min. front slewing radius | 1760mm |
| Engine | |
| Model | YANMAR 4TNV98T-ZCSLGC |
| Type | Water-cooled, Four-stroke, inline turbocharged |
| Rated Power@Revolution Speed | 54.1kw/2200r/min |
| Displacement | 3319mL |
| Cylinder bore × stroke | 98×110mm |
| Emission standard | GB20891-2014 China Phase III |
| Rated fuel consumption | 218g/kw.h |
| Max. torque | 272.3-297.7N.m |
| Traveling/swing system | |
| Qty. of carrier rollers (single side) | 1 |
| Qty. of track rollers (single side) | 5 |
| Traveling brake type | Wet disc brake |
| Swing mode | Hydraulic drive internal tooth single-row ball-bearing |
| Swing brake type | Wet disc brake |
| Hydraulic system | |
| Hydraulic control type | Pilot proportional control valve |
| Hydraulic system type | Load sensing control system |
| Max. flow | 160L/min |
| Main pump model | HP3V80 |
| Operating pressure | 265kgf/cm2 |
| Main valve model | HVS18+ |
| Fill capacity | |
| Fuel | 135L |
| Engine oil | 11.2L |
| Hydraulic oil | 174L |
){kind=link}